How to Pair the display to the HomeWizard
Pair the display to the HomeWizard. When all desired weather sensors are paired to the display, the display can be paired with the HomeWizard.
Please note: the must be data visible on the display before you pair it with the HomeWizard.
You have to do the following steps:
- Open the HomeWizard-app and open the
'Menu'
- In the Menu select
'Manage Devices'
- Right corner press
'Add device'
- Select
'Weather'
- Than
'Weather Station'
- Hold this screen 'Add weather station' and go to the display
- Press the 'link' button on the display.
- Behind this button a green LED indicator will start flashing.
- Press the 'Pair weather station' on the HomeWizard-app (within 30 seconds of the previous step).
- The HomeWizard will recognise the display and shows the paired sensors.
- Check all sensors show the values in the HomeWizard app
- Press 'Save' to saved the weather sensors on the HomeWizard
- Hold this screen 'Add weather station' and go to the display
Now the HomeWizard to have control over your weather sensors from the display