How do I calibrate the HomeWizard / Smartwares anemometer?

The wind direction is calibrated once at the factory. If you notice that the displayed wind direction in the app is not correct, it is possible to reset the wind direction with the following procedure:

  1. The wind meter must be supplied with electricity, make sure that the batteries and battery pack are connected.
  2. Aim the wind vane to the north. Use a compass or card if necessary.
  3. Use a narrow pin (for example, bent paper clip) to press the "SET" button while the wind vane is pointing north.


The wind direction has now been recalibrated.