Linking the Thermohygrometer on the display and/or HomeWizard 


A1. Connect the thermo-hygrometer directly to the display

  1. Open the battery holder of the thermo-hygrometer by unscrewing it.
  2. Takes the batteries out. This ensures that the thermo-hygrometer is stress-free.
  3. Press the 'Link' button on the display. A green LED indicator will flash behind the link button.
  4. Place the 2 x "AA" 1.5V batteries in the battery holder in the thermo-hygrometer (within 30 seconds).
  5. The LED indicator lights continuously to confirm that the pairing has been successful.
  6. Mount the thermo-hygrometer on a desired surface.


It can take up to 10 minutes before data is shown on the display. Do not attempt to reconnect the thermohygrometer during this period.

  • Because the thermo-hygrometer is NOT linked to the display but directly to the HomeWizard, the values of the thermo-hygrometer are only on the HomeWizard.


A2. Then connect the display to the HomeWizard.

If all desired weather sensors are linked to the display, the display can be linked to the HomeWizard.


ATTENTION: visible data must first appear on the display before you link the display to the HomeWizard.


  1. Open the HomeWizard application via your smartphone and / or tablet and open the MENU.
  2. Go to "Devices"> Add device> Weather and then select Weather station.
  3. Press 'Link' button on the display. Behind the link button the green LED indicator will flash.
  4. In the opened HomeWizard app, click "Link weather station" (within 30 seconds of the previous step)
  5. The HomeWizard recognizes the display and the associated sensors. Check this to make the values visible in the HomeWizard app and press Save.


B. Connect the thermo-hygrometer directly to the HomeWizard

  1. Open the battery holder of the thermo-hygrometer by unscrewing it.
  2. Takes the batteries out. This ensures that thermo-hygrometer is stress-free.
  3. Open the HomeWizard application on your smartphone or tablet and open the MENU.
  4. Go to "+ New Sensor" and scroll down and click on 'thermo-hygrometer'. For type: select '868Hz Smartwares'.
  5. Give a name to the thermo-hygrometer and then press link.
  6. You must now insert the batteries into the thermo-hygrometer within 30 seconds.
  7. The HomeWizard recognizes the thermo-hygrometer and code appears. Save this sensor and after a few minutes the values will also be visible in the HomeWizard app.
  8. Mount the thermo-hygrometer on a desired surface.


  • Because the thermo-hygrometer is NOT linked to the display but directly to the HomeWizard, the values of the thermo-hygrometer are only on the HomeWizard..